Shows and Events

FIND US HERE

Spring Quilt Festival
Ardingly
27th Jan - 29th Jan 2012

Spring Quilt Festival
Edinburgh
24th Feb- 26th Feb 2012

Basket (£)

Item

Qty

Price

Sub Total:	£0.00
Delivery:	£0.00
Total:	£0.00

44000_TEMP_PROMO2

Fabric Packs

CHARM PACKS

FAT QUARTER BUNDLES

Home > Husqvarna Viking > Accessories > Presserfeet >

Single Welt Cord Foot

To cover welt cording:
1. Use 1/4" (6 mm) Cotton Filler Cord. Cut strips of bias or cross grain fabric wide enough to cover the cord plus seam allowance.
2. Snap on the Single Welt Cord Foot. Select center needle straight stitch, stitch length 3.
3. Place the cording on the wrong side of the fabric strip and wrap the fabric strip around the cord.
4. Place the fabric and cord under the Single Welt Cord Foot with the cording in the groove on the underside of the foot.
5. Sew to cover the cording with the fabric.
To stitch covered welt cord into a seam:
1. Snap on the Single Welt Cord Foot. Select center needle position straight stitch, stitch length 3.
2. Place the covered welt cord on the right side of the fabric along the seam line. Place it under the Single Welt Cord Foot with the welt cord in the groove of the foot. Stitch the welt cord to the fabric. Clip the seam allow-ance of the welt cord at curves and corners.
3. Place the second piece of fabric right sides together with the first. The welt cord will be between the two layers. Place the welt cord in the groove and stitch with the first stitching line up. Touch the width to adjust the needle position slightly to the right to cover the first stitching.

Our Price: £14.99

« Back

Home About Us Gallery Blog Contact Us / Map

We accept the following cards using a 28bit encryption